|
Build Your Online Product Catalogs?
Shoe mold silicone rubber
A. mainly used for shoe soles mold making B. Two-component silicone rubber with tin-catalyst C. Cured under room temperature D. low shrinkage E. excellent fexibility & easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. Shoe Mold Silicone Rubber features: A. Two-component silicone rubber with tin-catalyst B. Cured under room temperature C. low shrinkage D. excellent fexibility & easy demould Shoe Mold Silicone Rubber Standard
Datasheet: Model Appearance Viscosity (cps) Hardness (A°) Tensile Strength (***) Tear Strength (KN/m) Elongation (%) Mixing ratio (%) Pot life(H) Demould time(H) 218 White �5000 18±2 �.3 � �00 2~3 0.5~2 2~4
Shoe Mold Silicone Rubber Using Instruction:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried
Any further information required of shoe mold silicone rubber, pls feel free to contact Mr Chris Mobile: 0086-13045 |
Company: |
Shenzhen Hong Ye Jie Technology Co.,Ltd
|
Contact: |
Mr. Chris Yao |
Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District |
Postcode: |
518117 |
Tel: |
13045897551 |
Fax: |
086-755-89948030 |
E-mail: |
|
|
|
|